How do I configure AirPrint in Xinca?

AirPrint is an Apple technology that helps you create full-quality printed output without the need to download or install drivers.

Before configuring AirPrint in Xinca you should check if your printer supports AirPrint, you can find a list of available printers on Apple's official website: List of AirPrint printers.

Note: If your printer does not support AirPrint it is still possible to print, however you'll have to use a cable to connect your printer to a Mac.

First off, you should connect your AirPrint printer to a Wi-Fi network. Follow your printers instructions to connect to a Wi-Fi network; If you're not sure how to do this you can follow this guide: Connect an AirPrint printer to a Wi-Fi network

Configuring AirPrint is done in the AirPrint payload within a profile. In Xinca it is possible to configure multiple AirPrint services in a single profile.

When setting up an AirPrint service you will need to configure the following things:

  • IP-Address
  • Port
  • Resource Path

After configuring these you can choose to force Transport Layer Security (TLS). 

Note: 'Port' and 'Force TLS' are available only in iOS 11.0 and later

Once you've set up an AirPrint service you can start using AirPrint on your devices, if you don't know how this works please refer to the following guides:

If you are having trouble with AirPrint or if you have questions on how to use AirPrint, please refer to Apple's official support pages on AirPrint: 


Have more questions? Submit a request


Article is closed for comments.